Fifties Mercury "Sportscar" Unearthed-Needs Work

The late 1950s was a tumultuous time for Ford Motor Company. They were gung-ho on matching General Motors almost car-for-car, leading to the introduction of the Edsel, larger 4-seat Thunderbird, and the largest unit-bodied car built at that point, the glorious and gargantuan '58 Lincoln lineup. Following up on that would be the upsized and upmarketed Mercury lineup. Perhaps in the heady days of fall '57 when it became apparent Edsel was doomed and the bigger Tbird had yet to begin its meteoric sales climb over the '57 2-seaters, perhaps Mercury designers were called on to do a quick "sportscar" based on the new-for-'59 Mercury chassis. Cut down to about a 115" wheelbase, it still would have had the prestige of the Mercury nameplate. It would have had 2 small fold down rear seats and the Tbird's front bucket seats for true 2+2 seating. Using as many production components as possible, this Marquis coupe could have gone on sale in the first quarter if '59 if necessary, if the 4-seat Tbird had bombed.

Yeah, all this is fake, but I have fun reimagining the past! I really like the way this one turned out. It has a bit of late Loewy 2-seater designs in the greenhouse and the rocket motif works well on a sports coupe. I think it could have been the drivers' car of the day.

If I don't get back before then, I hope everyone has a great new year! I, for one, am very glad 2013 is coming to a close and I hope it doesn't kick me in the ass one more time before it's history, lol.

Merry Christmas!

At first I thought making the new Mustang into a notchback would be easy. I had done that several times to the previous Mustang. But I ended up having to change almost every body panel. I shortened the rear overhang by about six inches—probably not doable in the real car but it just helps the proportions so much! I also added a strake to the center of the car. I don't think the Mustang's long-lived styling cue of the side scallop with "vent" trim is really strong enough on the new model. By adding a simple horizontal door rub strip, I've evoked that cue without changing any sheetmetal at all. The angle of the C-pillar is important, too. I did several versions before settling on this one, which I think works with the shortened, lower body really well.

I'd like to thank each and every reader of casey/artandcolour this year and wish you all happy holidays, a very merry Christmas, and a happy new year. I may have a New Year's "card" that day, too, lol. Peace and love, everyone!

Bring Back the Big Lincoln! 2015 MkTC

Using today's Lincoln design language, why aren't they fielding a large, rear-wheel drive luxury sedan? All of their cues work quite well in a larger, more elegant manner. The roof could be a large powered sunroof like the smaller MKZ, but perhaps ending in a 1950s overhang instead of lying flat over the backlight. The backlight could also be programmed to lower for ventilation, bringing back memories of the late Fifties Marks and the Sixties Breezeways. Slim C pillar opera windows are beautifully sculptured with 24kt gold Lincoln Star logos embedded in them. This rear-wheel drive based platform offers electronically controlled all-wheel drive, too.

1961 Cadillac Eldorado Calais V12 Sport Coupe

Meant to evoke a vintage PR/Marketing post card, the altered proportions of my 1961 Eldorado Calais V12 Sport Coupe really show off the new-for-'61's tailored sheetmetal and gorgeous lower skeg fins perfectly balancing the upper tail fins. I added a bit of unique front fender trim meant to celebrate the first postwar V12 developed by a domestic automaker.

 

Quickie 2-hour project tonight . . . 

1961 Cadillac Eldorado Calais V12 Sport Coupe—What if Caddy had entered the personal luxury coupe/Thunderbird market segment a generation earlier than it did? What if Pininfarina's beautiful "Jacqueline" coupe had been a ruse to throw off any actual "coupe rumors" from leaking out of Cadillac?

I propose the '61 Eldorado could have been reborn as a super-exclusive and super-expensive V12 2+2 coupe replacing the previous Pininfarina Brougham sedan as the pinnacle of Cadillac's showroom. A full two-feet shorter than the standard Series 62-based Eldos of recent years, the V12 coupe would have seating for two. The rear compartment could be outfitted with occasional rear seats or  fitted luggage for a truly European Grand Touring experience. 

Although the front clip is extended to house the domestic industry's first postwar V12, at 115" the wheelbase is a full 15 inches shorter than the standard convertible. A shorter rear deck contributes to its overall 24 inch length reduction to approximately 200 inches.The roof is brushed stainless steel and the slightly broader, equilateral rear pillars hint at the new rooflines coming from Cadillac across the board for '62.

2014 Delgiata Avarante—Plug-in Sport Sedan

 My 2014 Delgiata Avarante plug-in hybrid is a capable sports sedan as well as an efficient electric vehicle with room for four passengers and their luggage, accessible by a remote rear hatch. 

This is the newest member of the Deligata car company—my mythical manufacturer's entry in the burgeoning luxury electric 4-seat compact 5-door segment.

The "face" of Delgiata will consist of a mailslot upper grille with a brushed aluminum" pencil mustache" above with D-E-L-G-I-A-T-A letterspaced in chrome attached to it, teardrop headlights, and ample underbumper air intakes for the regenerative brakes and aero management. 

Delgiata is the first to retro the '80s with this simplistic and efficient aero-front end design, today rendered in carbon fiber. The monocoque is a mixture of carbon fiber, aluminum, and tailored high-strength steel for lightness.The brushed aluminum side cowl trim houses the access hatch for the plug-in charging outlet, proximity sensors for the side radar accident avoidance software and retracts at speed in conjunction with the aero- and HVAC-systems for ventilation. Simple clean-sided styling with careful cutline management, electronic rear coach doors, and full length panoramic glass roof are other Delgiata hallmarks. 

• Rear wheel drive-based platforms include electronic all wheel drive.
• Avarante is derived from "avant" and "variant." 
• Delgiate was "founded" ca 1967. I was ten years old.
• The company logo is a stylized spider. One of the earliest cars I drew in the beginning was the Delgiate Spider, a sports car. The logo is rendered in brushed aluminum with bright red carbonfiber inlays
• Chop began as a current generation Mercedes C Class sedan to get the proper rear wheel drive proportions to begin with.

Focus-sized Lincoln Convertible–the Capri is Back!

I probably should have waited to post this, spread them out a bit since I so rarely have time to work on "my cars" these days, but I finished this just after the Buick Regal Electra Touring, below, so here it is: the 2015 Lincoln MKE Capri convertible.

This would be a Focus-sized Lincoln, below the MKZ, but would include a convertible and coupe in addition to a sedan and crossover. I illustrated this one in the optional Pewter-and-Navy Luxury group, a nod to the fabulous Designer Editions of the past. The two tone paint would be separated on the side by a full-length chrome spear just below the window line, and both colors would have a silver-and-gold metallic flecked clearcoat to tie them together.

The interior would feature four bucket seats in all models, and would include optional fine fabrics in addition to leather, with one having button-tufted seats evocative of the '61 Lincoln's, themselves evocative of the fabulous Eames chairs of the Fifties.. There would be several choices of interior colors including mono- and duo-tones. Advertising would feature these fabrics and interior colors. Perhaps it would finally jolt the industry into offering something more than gray and beige leather.

"Electra" Becomes Buick's Plug-in Series Moniker

2015 Regal Electra Touring

Just as GS is Buick's performance line, "Electra" becomes the division's nameplate for plug-in electric vehicles. There would be Verano, Regal, and LaCrosse Electra models eventually. Above, the Regal Electra Touring, the new wagon version of the Regal sedan. Also shown above is the topline "Diamond Blue Luxury Group," which includes exclusive silver-blue alloy and trim. Also included is Buick's new "Wicker Canework" embossed carbon fiber for accent. Doors are accessed via electronic keyfob and touchpads on the B- and C-pillar. The blanked-off aero grille insert has subtle embossing to catch the light evoking Buick's trademark vertical grille bars. Two bonus points for anyone recognixing the 1967 Wildcat's rocker panel mounted "Ventiports," which now house the radar units for the 360° proximity sensors used in conjunction with other accident avoidance systems.

The Caprice is Back

Beginning with Chevrolet's new SS sedan, I've changed GM's latest Australian import into the new American Caprice. I really think it's a great name, one that can be used as a top-line sedan again, even this performance-based sport sedan.

At first, I just wanted to change the dated looking SS front end with a new Impala-inspired grille, but then I saw other things I wanted to change. The C pillar now has an extended window graphic behind the rear doors, similar to the Cruz (and the fabulous historic Vauxhall Carlton). There's now a small pseudo 3rd window behind the doors creating a larger appearing glass area and a straight beltline instead of the faux BMW "Hoffmeister Kink" on the production model. I finished it off with a 21st century color-shifting pearlescent version of Chevy's classic Evening Orchid and the interior would come in a variety of 1960s Blaine Jenkins-inspired fabrics and leathers and upholstery styles on the 4 standard Recaro buckets. Blaine is a retired GM car designer with a long career in interior designs for both concept cars and production vehicles. He is a Facebook Friend introduced to me online by the Palm Springs Automobilist. The first '65 Caprice sedan interior, Cadillac level fabrics and design, was Blaine's work.

I illustrated this newest Caprice with the Smoked Amethyst wheels, rocker panels, and trim of the optional two-tone Classic package. Several other period-inspired two-tones would be available, all in this color-shifting pearlescent paint technology.

Happy Veterans Day 2013! New MKZ Continental

2015 Lincoln MKZ Continental Touring Sedan, Pucci Edition

What started out as a quick chop to add more glass to the MKZ's cool fastback roofline, ended up being a second generation dual hatchback with electrically-assisted "clap-hand" doors. To manage the rear trunk cutline better, I made this glass-roofed sedan a hatchback. moving the cutline up into the roof pillar matching the existing rear door's cutline. Using an existing division on the edge of the trunk, I've made it a cutline as well. Picking up an idea from a Lincoln concept car of several years ago, instead of opening the entire hatch, a small "drawer" at the edge of the trunk would slide open with a fob button, revealing a beautifully finished luggage drawer complete with secondary top. Once the packages were stored, the top would lower ensuring all would fit nicely as it all glides back into the trunk. I sectioned the body a few inches, an old hot rod trick, making the body sides lower and less massive, and added that flowing third window.

This Pucci edition recalls the great Marks of the '70s and '80s. It comes in a very subtle two-toned Aubergine and Smoke Pearlescent with micro-thin areas of gold dust embedded into the paint at the color breaks. The effect of the pearl and gold clear-coat layers is a magnificent color shifting of all panels making the transitions even more subtle. A 24k gold Lincoln "Star" is embedded in the rear side glass, not only evoking those classic opera window logos, but is also taxed as a piece of jewelry recalling the early 1960s Imperial Crown gold crests. It is this American/European mix of function and style that lead me to name this hatchback MKZ, the Continental Touring Sedan. It signals the rebirth of the Continental nameplate. In addition there would be a flagship sedan, The Continental Town Car, as well as a new Continental Mark coupe.

I dedicate my newest Lincoln chop to America's veterans. I chose The American Luxury Car, and a European designer to celebrate Veterans' Day. We saved Europe and have gone through Hell and high water with them. I think this union of American luxury and European fashion celebrates what our veterans fought for. My dad served for almost 23 years and I know the cost of that service. Today my heart goes out to all, as always.

2015 Camaro Type LT—The Hatchback Returns

I would like to see the Camaro be repackaged. I'd like to see it slightly smaller, much lighter, feature better visibility, and offer more room inside and in the trunk. I've given it a sleek hatchback as well. My Type LT, an old Camaro model name, now stands for "Luggage & Touring" and would offer optional fitted luggage as well as several different luggage area treatments/hardware for various sports activities. The Camaro was a hatchback for decades, so it shouldn't be too much of a stretch for today's buyers! I've placed it along the shoreline of my town, lol.

Toyota Yaris 2014 Specs, Interior, Price, Engine.

Toyota Yaris 2014

Toyota Yaris 2014 Specs, Interior, Price, Engine

If you are confused to choose the car that suits you, here there is the latest car from Toyota, the Toyota Yaris 2014. Some time ago, Toyota officially launched the facelift variant of its latest hatchback the All New Yaris 2014 in Thailand. Referring to the sporty design which used the latest Vios, city car comes enchanting.

After the initial quarter of 2013 were then exhibited at the Shanghai Auto Show and the Bangkok Motor Show. Now it's time the country is looking forward to a public presence. Answer the problem when this 2014 Yaris facelift will be marketed in Indonesia, Widyawati Soedigdo as GM Corporate Planning and Public Relations of PT Toyota-Astra Motor (TAM) to speak.

Toyota Yaris 2014 Behind Side

Toyota Yaris 2014 Front Side

Toyota said that the all-new 2014 Toyota Yaris will not enter Indonesia this year (2013). "New Yaris is not this year, but will show up next year," said Widyawati Soedigdo on Wednesday.

In Thailand, the new Yaris models are available 4 types: type G is priced Bath 599 000 or USD 209.6 million equivalent, type E sold 549,000 Bath or Rp 192 million, priced at 519 000 Bath Type A or equivalent to Rp 181.6 million and the latter type J Eco Bath which sold 469,000, equivalent to Rp 164 million.

Toyota Yaris 2014

Interior of Toyota Yaris 2014

2013 Toyota Yaris Trend Deco lines will be available in white or silver, the color chosen to maximize the visual impact, borderless versions will be offered in a variety Deco exterior. To design the interior styling of this car exterior design reflects the theme of black and white – with a touch of ocher contrast – to create a clean and visual style.

The geometry of the center console has changed with soft-touch dashboard and door panels and white to emphasize the horizontal line design. Dashboard itself conforms to the exterior bodywork with surface detail Deco lines. Sensory allure of cabins are well appointed in details such as the short gear lever with larger buttons, improved tactile quality. Visual appeal is a greater element of paint and use yellow stitching.

Black and white design theme is equipped with seat, backrest up bolsters and headrests with leather, pearl white with yellow stitching and headrests (front and rear) with surface finishing Deco lines. Central chairs’ fabric made softer.

2012 Chevrolet Copo Camaro Specs Information

2012 Chevrolet Copo Camaro

2012 Chevrolet Copo Camaro Specs Information

f you are confused to choose which car would you buy, we offer the latest car made ​​Chevrolet, the 2012 Chevrolet COPO Camoro. This car just in prodksi as many as 69 cars, said general motors.

For the initial COPO Camaro price is $86,000. The cars were sold without the vehicle identification number and is not for use on public roads.

COPO stands for Central Office Production Order and was originally used by dealers in 1960 to build the Camaro models are not otherwise available.

New details for 2013 including " legacy " grille, new exterior graphics options, a revised interior package with custom carpet, dedicated racing wiring harness, revised front and eye integrated transmission cooler radiator. The COPO Camaro is available in Black, Summit White, Victory Red, Silver Ice Metallic and Ashen Gray Metallic.

Copo Camaro

Copo Camaro

GENERAL INFORMATION:

NHRA horsepower ratings:

- 327/4.0L supercharged– 550

- 327/2.9L supercharged – 500

- 427 Naturally aspirated – 425

NHRA shipping weights:

- 327/4.0L – 3175 lbs

- 327/2.9L – 3250 lbs

- 427/N/A – 3195 lbs

Recommended max engine RPM – 7500

CHASSIS:

Chrome-moly cage – NHRA certified to 8.50 ET

Subframes tied together

Front engine cradle modified to accept additional oil pan clearance

Rear subframe modified to accept unique COPO NHRA Stock Eliminator suspension

REAR SUSPENSION:

4-bar with adjustable top links

Adjustable panhard link

Double-adjustable Strange Engineering coil over shocks

Anti-roll bar

Interior of Copo Camaro

Interior of Copo Camaro

FRONT SUSPENSION:

Adjustable Strange Engineering coil over struts

Sway bar removed

STEERING:

Production steering gear modified for manual (non-assist) operation

BRAKES:

Light-weight vented rotors

Billet 4-piston light-weight calipers

Light-weight tandem master cylinder

OEM pedal modified to mount master cylinder

All components provided by Strange Engineering

WHEELS:

 Bogart Racing light-weight with unique COPO logo

Forged outer ring

Billet center

15” x 10” rear – 5/8” studs

15” x 3.5” front – 1/2” studs

4 – 3/4” bolt circle pattern

TIRES:

Rear – 9” x 30” x 15” radial slick

Front – 4.5” x 28” x 15” – drag-only

GEARS & AXLES:

Strange Engineering 9” aluminum center section

Light-weight steel spool

Strange 9310 alloy 4.29 ring & pinion set

Strange Engineering 35-spline axles

Strange Engineering chrome-moly yoke

Chevrolet Copo Camaro

DRIVE SHAFT:
4” OD x .125” wall 6061-T6 aluminum tube
Chrome-moly end caps
Forged chrome-moly slip yoke
Heavy-duty 1350 universal joints

TRANSMISSION:
- ATI Racing Products “Pro Glide”
 # SFI-approved ATI “Super Case”
 # 1.80 ratio 9310 straight cut gear set
 # Precision balanced carrier with 4340 tool steel output shaft
 # Turbo spline input shaft:
   * 327/4.0L – Vasco material
   * 327/2.9L and 427 – 300M material
   * 7 clutch high gear pack
- Billet clutch hub
- High flow front pump with heat-treated pinned stator tube
- Deep aluminum pan
- Hard Chrome Rings
- Fluid overflow catch can

TORQUE CONVETER:
- ATI Racing Products “Treemaster MRT” Series
  # 327/4.0L – 9” diameter housing
   * Furnace brazed impeller and turbine fins
   * Precision pump drive tube
   * Heavy duty needle bearings
   * 22 element sprag with dual cage construction
- 327/2.9L and 427 – 8” diameter housing
 # Furnace brazed impeller and turbine fins
 # Precision pump drive tube
 # Heavy duty needle bearings
 # Investment Cast Cover

SHIFTER:
 - Hurst “Quarterstick” – 2-spd. automatic
  * Forward pattern
  * Built-in neutral safety switch
  * Light-weight aluminum cover

Engine of Chevrolet Copo Camaro

FUEL SYSTEM:
 - Aeromotive “Eliminator” fuel pump – free flow rating = 800 lb/hr
 - Aeromotive A1000 pressure regulator with manifold pressure compensation capability
 - Aeromotive 10-micron high-flow filter
 - Light-weight black nylon braided -8 AN hoses
 - Black anodized aluminum -8 AN hose ends and fittings
 - High-impedance fuel injectors
  # 327/550 – 105 lb/hr @ 43.5 psi with EV1 connector
  # 327/500 – 80 lb/hr @ 43.5 psi with EV1 connector
  # 427/425 – 42 lb/hr @ 58 psi with EV6 / USCAR connector

ENGINE CONROLS & IGNITION:
 - Delco MEFI 5A electronic fuel injection processor
  # Speed density operation
  # Interfacing software & hardware available in the aftermarket
  # Cable-actuated throttle
  # Production LS7 ignition coils
  # Production LS7 secondary wires
  # GM sensors

ELECTRICAL:
 - Dash-installed control switches:
  # Starter
  # Ignition
  # Fuel pump
  # Cooling fan
  # Intercooler pump/water pump, depending on engine package

GAUGES:
- Autometer with gold “Bowtie” logo on dials:
  # 5” 10K RPM tach with shift light
  # Electronic water temp with 2 1/16” face and 100°-260°F range
  # Electronic trans temp with 2 1/16” face and 100°-260°F range
  # Electronic oil pressure with 2 1/16” face and 0-100 psi range
  # Electronic fuel pressure with 2 1/16” face and 0-100 psi range
  # Voltmeter with 2 1/16” face and 8-18v range

SAFETY:
 - RJS Safety Equipment 3” driver restraints
 - RJS Safety Equipment window net

Some Not so Oldies but Pretty Goodies

 

This 2012 Charger coupe is my most viewed chop on the 'Net. Many of "my cars" have found a life outside of casey/artandcolour-cars, but this particular one has been uploaded to more than 100 websites and has more than 7,000 views on my site alone. And unlike many of my more polarizing redesigns, has met with almost universal "likes."

Taking the rather mundane but very competent new Malibu, I added a coupe greenhouse much like the 1970s Chevy Monza subcompact, itself a nod to an early '70s Ferrari coupe by, I believe, Pininfarina.

Yes. Hard as it is to believe, I designed a new 4-door Lincoln without suicide doors! This is my idea for a new MKS sport sedan. It would be based on the Mustang platform, rear wheel drive with optional performance all wheel drive, and I think it would go a long way in reestablishing Lincoln as an aspirational brand.

 

Another Mopar coupe, this time a flagship Chrysler Nassau V10 with pillarless styling. It was my idea to use the Viper's powertrain but wrap it in velvet instead of velcro. I still hope the powers-that-be at that company do something like this eventually. It could be sold in Italy, like many new Chryslers, as an imported  highspeed luxury coupe with American flair.

This little Chevy Cruz Z/11 hatchback was based on the Europe-only hatch. I correctly predicted Chevy's abandonment of its longstanding dual grille, only they introduced it on the new Impala and Traverse, not the Cruz.

 

A funky little longroof Hyundai "Shooting Break." Hyundai and its sister brand, Kia, are making leaps and bounds in styling and engineering and they're taking chances with new cars. I could see them coming out with something like this in the not-so-far future.

 

With Cadillac just announcing that its Volt cousin, the extremely gorgeous ELR coupe, is going to be priced from $75,000 and up, perhaps my idea for a Chevrolet Volt coupe isn't a bad one. The Volt lists for closer to $40,000 and with a similarly priced coupe, might just find a decent audience. Perhaps selling more of the coupe platform as a Chevy might help lower the Cadillac's pricepoint a bit. I was shocked at the "75 large" asking price and I don't shock that easily anymore!

2014 Lincoln MK-9E coupe. Plug-in Sports Luxury

Click on image to enlarge, as always, here at casey/artandcolour.

Lincoln MK-9E—This is my attempt at adapting Lincoln's current design language to the proportions of the late, and lamented, Marks VII and VIII. RWD and AWD would be available, as well as a Twin-turbo V8 or Plug-in hybrid with range extending EcoBoost 3 liter V6. Power Panoramic roof is standard, as are highly detailed wheels with body-color anodized as well as polished- and brushed-alloy wheels. The Eighties and Nineties are retro-ed in various ways, it's not too early, lol! The unique door handles resemble those on "suicide" door sedans, but in this case, the chromed portion mounted on the body next to the door is the receiver for the Smart Key and is touch-sensitive, descending quickly into the body revealing a clean, and, chromed, fingergrip for the door. The doors are power soft-opening-and-closing like the finest über German luxury cars.

I created this new Mark 9E, and made it this color, because of a cool Lincoln Mark VIII I used to see almost daily at my local grocery store. It belonged to a young man that works there, inherited from his late Dad. I took quite a few pics of his car, which while not perfect was quite a nice example. I thought I'd post those photos along with this chop when I finished, but of course, "the best laid plans of mice and men..." I've combed my eFolders going back a year and I can't find ANY of the photos I shot of his car. I have no idea where they may be. Since I can't find any of them, I'm thinking I must have put them all in a separate folder with some arcane name that made sense at the time, but which I can't recall right now. I only have about 35,000 photos to go through, so I'm not sure I'll ever find them, lol. Since I shot them, the car has died and was too expensive to repair. Let this Photoshopped Mark 9E be an homage to that once and beautiful automobile!

I've created a couple of other Mark 9s, or more correctly, Mark IXs:
Mark IX BiTurbo V12
Mark IX Luxury Coupe
Mark GT/V12 Sports Coupe

And of course, check out the "Labels" on the side for more Lincolns or to see if I've designed any other cars you'd like!

My Concept for Pebble Beach this Weekend!

The famed Pebble Beach Concours is this weekend in the Monterey, California area. It's often the site of new car launches. I've created a flagship station wagon, a full-sized plug-in hybrid, the 2014 Buick  Electra Estate Wagon. In addition to the trademark brushed aluminum-and-chrome Sweepspear and microveneer wraparound woodgraining, each front fender carries a platinum metallic circular access hatch highlighting the new TriColor Buick shield logo. Their design is a nod to the dual sidemounted tires so popular in the prewar period. The driver side panel opens to the plug-in circuitry. The passenger side opens to reveal four custom carbon-fiber cloth umbrellas, one for each well-cossetted interior passenger. Center opening side doors are powered as is the rear hatch and tailgate, the former's opening comprising fully 1/3 of the roof before it slides forward along roof rails.

This year at Pebble, I have a friend showing his '56 Mark II convertible in the Continental display, and another friend is there sheparding a pristing '65 Cadillac Coupe DeVille in the Cadillac display.

Audi A7C—Pillarless Two-door Coupe

My Audi A7C, an actual pillarless coupe version of Audi's 5-door A7 Sportback. The hatchback would be replaced by innovative slide-and-open tailgate opening design. I've simplified and refined Audi's corporate "face." The intertwined rings logo is smaller and moved to the header of the chrome grille frame. A central LED "light bar" has been added to the grille to unify the LED headlight graphic. There is a very subtle raised panel leading from this new higher-placed logo which fades into the rise of the aluminum hood. The taillights would also consist of a similar central panel LED bar tying their outer graphics together body-wide. A very American use of the Audi rings is their placement on the C-pillar, but, hey, that's me. I really think the new front end could be an effective refinement of their current design. Audi should have a competitor for the E-Class coupe.

2014 Cadillac CTS coupe—Artandcolour Elegance

Using the just-released photos of the 2014 CTS sedan, a more sedate and mature design than the current generation of Art & Science styling, "my" CTS coupe follows Cadillac's own strategy. Instead of the awesomely crazy and dramatic pyramidal Coupe now in showrooms, I created a pillarless coupe to compete with the Mercedes Benz E Series coupe. The profile is more flowing notchback than fastback and I've enlarged the already large grille just a little bit for a more formal look. Rather than use Caddy's now de rigeur slash door "handles" for this coupe, I used more elegant chrome handles. The "drama" in this coupe comes from the pillarless styling, ultra-luxe interior for four, a "faster" windshield angle and a 2 -inch lower roofline compared with the sedan. Aero wheels from the new electric coupe, the ELR, add to the quietness of this luxury coupe at speed.

2014 Delgiata Lineup Revealed: Eagle & Villager Hybrids

The first model in the 2014 lineup of my mythical car company, Delgiata: The Villager. Villagers are Executive class sedans with a dual-purpose hatchback. The electronic hatch may be opened remotely in one piece, lifting and sliding forward a bit on the roof for maximum opening, or in two pieces, with the glass lifting and sliding and the bottom part folding down and out to form a tailgate and longer loadfloor. Carbon fiber and micro-veneer construction is ultra lightweight and strong, and the plug-in electric motor is combined with a range-extending 1.5 liter horizontally opposed "flat" 6. Equipment levels are generous, with options limited to colors and owner-packages, including "Rear Office," "Entertainment," and full-boat, sybaritic, "Complete," packages.

The Villager joins the smaller, ultra-high mileage Eagle, below:


The second model introduced this year is the Eagle, the "entry-level" Delgiata that is anything but. Small exterior size belies the roomy 4-passenger interior, with every modern convenience. Construction follows its larger Executive brother's, the Village, in carbon-fiber and microveneer. In the Eagle, the plug-in hybrid drivetrain includes a range-extending .9 liter inline 3 cylinder. Combined they move the Eagle from 0-60 in 8 seconds while giving combined mileage ratings in the "150 MPG/e" range.

Both new Deligiatas feature electronic all-wheel drive.

These two new models in the Delgiata lineup join the 4-cylinder hybrid "Delivery Van" I created in the mid 2000s., here.

New Release 2014 Toyota Corolla

2014 Toyota Corolla

2014 Toyota Corolla.

After officially introduced a few weeks ago, the latest generation of Toyota Corolla seemingly will soon enter the world automotive market. Because the first unit of the latest generation of the Toyota Corolla Toyota Corolla 2014 has been successfully produced in Turkey. It is as it has been reported by Inautonews, Thursday (04/07/2013).

The first product is the 11th generation of the Toyota Corolla series is finished in white and has been inaugurated by the Turkish government as well as Japan. Going forward, the result of a 2014 Toyota Corolla production facilities are located in the city of Sakarya Arifiye, Turkey will be marketed in the European region, Africa, Central Asia and the Middle East.

2014 Toyota Corolla

The success of Toyota's Corolla production in Turkey in 2014 is not out of the 150 million euro investment by Toyota in the Sakarya facility which absorb around 900 workers. Peak capacity of the facility is planned to be achieved in 2014 with a total production of 150,000 units.

2014 Toyota Corolla Interior

2014 Toyota Corolla Seat

2014 Toyota Corolla sedan version has a few models. Corolla with a 1.8 liter engine that powered 132 HP (98 kW). While the Eco LE models with 1.8 liter engine power 140 HP (104 kW). New Corolla dimensionless length 4,639 mm, width 1,776 mm and height 1,455 mm. This dimension longer than the previous Corolla, which Toyota does want a more spacious cabin for New Corolla.

source : harianindo.com

What if. . . Mark II Slantback?

The 1956-57 Mark II coupe is a tours-de-force. It is elegance personified with its formal roof and clean lines. It is one of the cleanest cars of the Fifties decade.

With this chop, I'm exploring what the car may have looked like without the severely formal and close-coupled roof.  I gave it a faster roofline and backlight. I straightened out the classic body contour kickup in the rear quarters and, obviously, gave it rear fender skirts and chromed rockerpanel trim.  Smaller details include moving the exhaust outlets down from below the taillights to below the bumper, thus extending the "tubular" rocker panel trim. I filled in the former exhaust pods and glassed-over the license plate recess. 

I'm not in any way "improving" the Mark II with these changes, that would be impossible! But I think this look could have been developed into a stunning car by the Mark's stylists had they gone in this direction!

2015 Mustang—Evos-based V8 Pony Car

I thought I'd try a front 3/4 view of an Evos-based Mustang. I extended the wheelbase and then shortened the cabin and moved it backward. "Proper Pony Car Proportions" are absolutely necessary for any Mustang replacement. I prefer the original 2+2 style louvered C-pillar, compete with functioning interior air extractors rather than the current car's glass inserts, but they'd be available at no extra cost for people that prefer that look.

I've been under-the-weather for the past few months, and I'd like to thank everyone who has emailed me and sent their thoughts and best wishes. Summer is here, so let's all enjoy the slow and easy days of my favorite season!

2014 Biarritz: Bringing Formal Back

The Next Fleetwood Biarritz—I don't see any reason why today's angular and flamboyantly styled cars couldn't include a bit of last century's formality, too. This rendering takes Cadillac's maturing Art & Science design language, which is softening on its new sedans, and reinvigorates it with a stark new brushed stainless steel-capped, limousine-like rear window. Interior would be sumptuous, with seating for four on fine fabrics and leathers. The elegant mid Fifties Brougham is recalled inside as well, with silver vanity and tumbler set, as well as umbrella and Arpége by Lanvin in a cut crystal atomizer.

Repost: Mazda RX-8 Notchback

One of my least-viewed chops of all time, lol, the Mazda RX-8 notchback. I'm not sure why this hasn't been more popular, I love it, but I think it could be the fact that the RX-8 just wasn't very popular. I shortened the wheelbase and took away those Saturn-like rear half doors. This would be a 2-seater with a parcel shelf behind the front seats for packages. The car could be lighter and tighter than the regular hatchback 4-seater and I think could have provided additional sales. Generally I like the profile of notchbacks more than fastbacks, but give me a moment and I'll find a hundred fastbacks I love!

Repost: 2012 Saab 9-5 Hybrid Coupe

I think it's such a shame that Saab was shut down. They had such a storied postwar history and were very popular in areas of the country like New England. They are still quite ubiquitous around here, but we have no new ones to look forward to anymore. This was my idea for a top-line 9-5 Hybrid coupe, and would have included a dual-action hatchback which could be raised like a trunk or with the window attached like a hatchback. I believe VW was the first with this type of trunk on one of its Skoda models. I think the newest Saab design language had a lot of "legs" and was really looking forward to the smaller 9-3 and perhaps a 9-1 model in the future.

Repost: 21st Century Chevy Bel Air

This was chopped several years ago and was my idea for a top-end Chevrolet rear wheel drive luxury 4-seat coupe. I created it from a Mercedes Benz CL coupe and I used the quad taillights Bel Airs were known for. I also gave it a flying buttress roofline, evocative of the mid-Sixties Chevelle coupes, and of course,it  was a long-standing Corvette styling cue, too. The rocker panel brushed aluminum trim has faux "vents" in front of the rear wheels, an homage to the great little details Harley Earl was known for.

Repost: 2010 Crown Victoria Concept

One of my sillier chops from the past, this Crown Victoria concept was chopped in 2008 I believe. I worked in lower resolution then, hence the pixelation. I based this large, rear wheel-drive 6-passenger Ford sedan on a photo of an S-Class Mercedes, one of the few contemporary sedans with the correct rwd proportions built-in. I polished the front doors in a nod to professional pursuit vehicles nationwide and also indented the hood and trunk to catch the light in a way that would mimic Ford's classic racing stripes. Uplevel "civilian" versions would have a blanked out C-pillar, a la the classic "Galaxy" roofline, but fleet cars would use that very 1990s Crown Vic "sixth" window. Lastly, I'll just say that this was chopped way before the current Taurus hit the streets and it picked up my chromed trunk bar with the Ford oval almost 100%. I, of course, had based mine on the late '60s Torinos which had sort of similar trim pieces. My front end treatment used modified Cadillac headlights for a more vertical appearance, a nod to the '65-'67 large Fords and their stacked vertical headlights.

Happy Memorial Day to everyone, a day to remember all that have served and sacrificed for our country, and personally, happy birthday to me today, lol. (And a happy birthday to Clay, a longtime reader and contributor to those early car forums where I began chopping photos and posting them.)

Repost: 2014 Mustang?

One of my most widely-read, downloaded and reposted around the Web is this 2014 Mustang I created from the Ford Evos concept car. I first posted this rendering in September of 2011. I mentioned at the time that I felt the wheelbase was a little too long aft of the door. I thought I might go back and do a second one tightening up that space, but haven't gotten around to it yet! Interestingly I find the new Corvette Stingray to be too long aft of its doors, too. Maybe it's my eyes!

Just last week I was asked for permission for a website to run this Mustang. Sometimes you have no idea what types of "life" your work will lead once you've published it on the web!

21st Century Torino GT Sportsroof?

This reborn Ford Torino GT Sportsroof was chopped a few years ago, but had been posted only over at my other blog. I'm reposting some of those earlier pieces that never made it over here until I can carve some time out to finish new chops. In addition to being swamped with book projects I recently had a 16GB thumbdrive erase itself, losing my "Chops Start" folder with perhaps half  dozen new cars in various stages. Such is the electronic world!

This modern throwback coupe was created from a 4-5 door Tesla sedan if I remember correctly. I placed some of the German Alps behind it. I was born in Stuttgart in the Black Forest and at the time my Dad had his pink-and-black '56 Fairlane Sunliner shipped over there. I grew up with stories of how his Thunderbird-Special 312 V8's exhaust echoed through the Alpine passes and tunnels as he drove.

I think a 21st century Torino could once again be positioned as a powerful rear-wheel drive larger brother to the Mustang. I'd envision a 6-8 inch stretch in the 'Stang's wheelbase for a larger rear seat with added/upgraded luxuries.

Yellow Goodness from 2006

Until I can carve out the time to finish a bunch of chops I've started, I thought I'd post another couple of "oldies and oddies." Above, my Lamborghini LMPV-002 high-performance minivan! I created this light-hearted effort in 2006 from a Murcielago. The name is a combination of the marque's classic LM002 V12 full off roader from the 1970s and the European MPV—Multi-People Mover.

Way before there was an Estoque four-door concept, I created this QV350 Sedan. Ever since I saw a photo of the Iso Fidia sedan in the late 1960s, I've loved the idea of an Italian supercar sedan. This was before the current "four-door coupe" fad began, also.